|
| |
Electro-Guard
Model 110 - Corrosion Monitoring Station |
| For
aluminum, steel, composite, and wood hulls. Complete installation
kit includes: 110 (A, S or BR) Monitor Meter and RE-107
Reference Assembly. |
| |
| Model
110A - for marine aluminum hulls and structures. |
$
474.00 |
| Model
110S - for steel hulls and steel/iron structures. |
$
474.00 |
Model
110BR - for copper, its alloys, stainless steel, lead,
etc. |
$
474.00 |
| |
| Electro-Guard
Model 125 - Corrosion Monitoring Station |
| For
aluminum, steel, composite, and wood hulls. Complete installation
kit includes: 125 (A, S or B) Monitor Meter and RE-104 Reference
Assembly. |
| |
| Model
125(A, S or B)-0: No shaft selector switch. |
$
840.00 |
| Model
125(A, S or B)-1: Selector switch for 1 shaft. |
$
890.00 |
| Model
125(A, S or B)-2: Selector switch for 2 shafts. |
$
926.00 |
| |
| Electro-Guard
Model 208 - Automatic Control and Monitoring System |
| For
wood and fiberglass hulls to 45 feet LOA. Complete installation
kit includes: 208 Control Unit, RE-206D Reference Assembly,
two ZI-1 Insulated Anode Mounting Studs and one SB-6B Shaft
Sensing Wiper Assembly (Model 208-1) or two SB-6B Shaft
Sensing Wiper Assemblies (Model 208-2). |
| |
| Model
208-1 |
$
829,00 |
| Model
208-2 |
$
945,00 |
| |
| Electro-Guard
Model 210 - Automatic Control and Monitoring System |
| For
wood and fiberglass hulls to 45 - 65 feet LOA. Complete
installation kit includes: 210 Control Unit, RE-206D Reference
Assembly, four ZI-1 Insulated Anode Mounting Studs and one
SB-6B Shaft Sensing Wiper Assembly (Model 210-1) or two
SB-6B Shaft Sensing Wiper Assemblies (Model 210-2). |
| |
| Model
210-1 |
$
1,209,00 |
| Model
210-2 |
$
1,310,00 |
| |
| Electro-Guard
Model 620A - Automatic Impressed Current Control and Monitoring
System |
| For
boats with aluminum I/O drives, aluminum jet drives, large
outboard motors & aluminum hulls to 30 feet LOA. Complete
installation kit includes: 620A Controller, two color LED
displays, reference cell & ceramic coated titanium anode. |
| |
| Model
620A |
$
685.00 |
| |
| Electro-Guard
Model 700 Series - Automatic Impressed Current Control and
Monitoring Systems |
| For
wood, fiberglass, steel and aluminum hulls 50 feet to 300+
fee LOA. Prices for 700 series systems are quoted to meet
the individual requirements of each vessel. |
| |
| Electro-Guard
SRA Series Sliprings - Provide Low Resistance Electrical
Contact to Shafts and Propellers |
| Sterling
silver slip ring assemblies for propeller shaft sizes 1.75"
through 10" - all slip ring assemblies are built to
meet the cathodic protection current load required by a
vessel's shafts and propellers. Prices for the SRA Series
slip rings will be quoted on request. |
| |
| Electro-Guard
Model 902 - Corrosion Test Instrument Kit |
| Use
the 902 test instrument to: determine effectiveness of cathodic
protection, check bonding system integrity, check for AC
shoreline interference, troubleshoot AC and DC electrical
systems. The kit includes: Fluke model 110 digital multimeter,
protective carrying case with compartments for test probes
and leads, reference probe with 20' of test lead wire, 25'
test lead extension, a hardened steel test probe, instructions
for the multimeter and for corrosion testing. |
| |
| Model
902TI |
$
349.80 |
| |
| |
| |
